Sunday, October 26, 2008

CRICUT MACHINE TIPS & TRICKS

CRICUT MACHINE TIPS & TRICKS

Use Deep Cut Blade
Magnet0.035"/0.80mm thick
Speed 3 Med.
Pressure 5 Max.
Blade depth 6
Multi Cut 4

Use Deep Cut Blade
Chipboard 0.059"/l.50mm thick
Speed 3 Med.
Pressure 4 High
Blade depth 6
Multi Cut 5
Notes: A fresh mat is needed to hold material. Small pieces of chip-board may require tape to stay in place.

Use Standard Blade
Iron-on Fabric0.023"/0.58mm thick
Speed 3 Med.
Pressure 4 High
Blade depth 5
Multi Cut 1
Notes: Use a normal household iron at its highest temperature setting. Apply direct heat and pressure to flocking for approximately 30seconds. Peel protective liner when cool. Wash and dry garmentinside out.

Use Standard Blade
Emboss0.0160"/0.41mm thick
Speed 3 Med.
Pressure 5 Max.
Blade depth 6
Multi Cut 2

Use Deep Cut Blade
Stamp0.0415"/1.05mm thick
Speed 3 Med.
Pressure 4 High
Blade depth 4
Multi Cut 1

No comments: